【How-to】How to Reboot a DSL Modem Remotely

Can you reboot a router remotely?

As for remotely rebooting your router, newer devices may have an auto-reboot option that lets you schedule a reboot on a regular basis, like once a week or monthly. If auto reboot is not built into your router, another option is to get a specialized remote power switch like those offered at 3GStore.com.

Can I reset my cable modem remotely?

The only way of restarting a true modem is to power cycle it. However, a router or combined modem/router can normally be restarted remotely. Only a relatively small number of routers allow a restart to take place initiated over the Internet.

How do I reset my DSL modem?

Locate the reset button on your DSL modem. Depending on your model, it may be on the back or bottom of the unit. Look for a small pinhole, possibly labeled “Reset.” Insert a straightened paper clip into the hole, push in and hold for a few seconds and then release. Your modem will reboot.

How do I access my DSL router remotely?

When you want to access your router from inside the network; all you have to do is type in the router’s IP address in the web browser. Similarly, to access your router from outside, you need to type in your public IP address followed by remote control port no i.e. 8080. So, if your public IP address is 74.12.

How do I restart my router from command prompt?

Type “ipconfig /registerdns” and press Enter. Type “ipconfig /release” and press Enter. Type “ipconfig /renew” and press Enter. Type “netsh winsock reset” and press Enter.

How do I reset my wifi router?

To reset your router:

1. Locate the Reset button on the back of your router.
2. With the router powered on, use the pointed end of a paperclip or similar object to press and hold the Reset button for 15 seconds.
3. Wait for the router to fully reset and power back on.

Can I access my WiFi away from home?

Remote-sharing means accessing your router from outside your house or your personal network space. While this step will eventually allow you remote access, you need to be near your router to set up remote-sharing. To enable this option, open a browser in any of your devices running on a smooth WiFi network.

Can I access my home network remotely?

When you’re away from home, you can just point a browser to myhome.homefpt.net:8080 to access your router’s Web interface and manage your home network remotely. This works with almost all home routers, except for those from Apple.

How can I access my home router from anywhere?

To connect to your personal router remotely, go to your web browser on your phone. Type in your router’s IP address. It’s the same IP address you used when you were setting up the remote access. A log-in page will be displayed.

How do I access my router from the Internet?

Open a web browser such as Internet Explorer. Go to the Address bar and enter the IP Address of your router then press Enter. For example, 192.168. 15.1 is the default IP of most VOIP routers.

How can I connect to WiFi remotely?

How to Connect Remotely to a Network

1. Click the Start button and type the word Remote. Then click the Remote Desktop Connection icon.
2. Enter the name of the computer you want to connect to.
3. Click the Connect button.
4. Enter your username and password, and then click OK.
5. Use the remote computer!

How do I access my modem remotely?

Please click on [MAINTENANCE] > [Access Controls] > [Services]. Tick [Enable] box under WAN for HTTP Service, and record down the [Remote WAN Port] number. Then click on the [Apply] button to save the settings. The modem can be remotely accessed now from the Internet via its Public IP Address.

Can I access my router from my phone?

In Android, settings menus vary from phone to phone, but once you find the Wi-Fi settings: Make sure your phone is connected to your router’s Wi-Fi network. Tap on the network name. Look for a ‘gateway‘, ‘router’ or other entry in the list.

How do I get into my router without a password?

If you can’t access the router’s web-based setup page or forgot the router’s password, you may reset the router to its default factory settings. To do this, press and hold the Reset button for 10 seconds. NOTE: Resetting your router to its default factory settings will also reset your router’s password.

How can I access my modem?

Open your Internet browser e.g. Internet Explorer, Firefox, Chrome, Safari, etc. and enter the IP address of your D-Link modem in the address bar: This should open the login page for your modem’s configuration pages.

Does Resetting router change WiFi password?

Once you reset the router, the password for logging into the web interface and the WiFi password will be reset to their default passwords.